We’ve been looking at just how easy it can be to run smart gadgets in your house using Google Home. Philips Hue lights are one of the compatible systems that work with Google Home allowing you to ‘talk’ to your smart Hue lights. Here’s exactly how to talk to your Google Home and Philips Hue bulbs. Continue reading “How to talk to Philips Hue & Google Home”
While most of the photos we take stay locked forever on our smartphones, it’s now getting easier to print them at home. In part one of a three part series here on the blog, we’ll take a look at some of the gadgets out there that will print photos for you. First up, the Fujifilm Instax Share printer.
Testing the Fujifilm Instax Share SP2 photo printer
Fujifilm has recently upgraded its pocket photo printer, the Instax Share, to make numerous improvements; the new model is known as the SP-2. It prints mini size photos only, that measure 62mm x 46mm. I had a chance to test this device for several weeks, and here’s what I found. I previously reviewed the Instax Share SP-1, and you can read that review too.
Set up wasn’t intuitive
Setting up the Instax Share printer wasn’t very intuitive. With the printer charged, and the app downloaded, you might think you can just open the app and print. Not so. In the initial set up, you select which type of printer (sp-1 OR sp-2) you’d like to use. But after that it doesn’t tell you where to go or how to move forward with setup.
How to set up and connect Fujifilm Instax Share
Fortunately for me, I’ve set up enough Bluetooth and Wi-Fi devices to know that at this point, I needed to exit out of the Fujifilm app, and go to the phone’s ‘settings’ menu. Select ‘Wi-Fi’, then switch the printer on.
At this point you should see Fujifilm/Instax/Share or some combination of those words pop up as a Wi-Fi choice. Select it, then once it’s connected, you can close settings and return to the app. By now you should see the new printer in the app, if you don’t click ‘Connect and print’ and the app should connect.
Once the set up process is complete, printing is ultra easy. Simply select the photos icon in the app or take a new photo. Once you’ve chosen what you want, select “connect and print”. There are several other printing options, but we’ll get to those in a bit.
Annoyingly, the printer will go to sleep after a few minutes, so it’s important to note if you left it unattended for a period of time, you may need to turn it back on and reestablish the Wi-Fi connection before you can connect again. This involves basically repeating part of the set up process each time you want to print. I find this a huge pain. You can’t just turn the printer on an pop out a few prints, and because the printer automatically goes to sleep after about 5 minutes it’s a constant on/off/reconnect process.
Fun new films – but who owns Polaroid film technology?
The photos printed on the Fujifil Instax Share SP-2 are on a retro-style ‘Polaroid’ frame. Fujifilm now has this technology, though Fujifilm rep Florence Pau tells me, “Fujifilm has a long history with instant film and Instax has no affiliation with Polaroid brand or technology. Essentially, the borders are there to seal the film.”
Polaroid was more blunt when I asked them why Polaroid cameras don’t use their original iconic film. Stephanie Agresti told me in an email, “Polaroid does not presently own the previous film technology. Polaroid products now integrate Zink Zero Ink technology to produce images instantly.”
Since my last test run with an Fujifilm Instax Share printer there are a variety of new instant films that have been released; all of them are mini sized, similar to what you might get from a photo booth. Available in 10 packs, you can now get printed borders on the film, including stripes, a colourful checkerboard (called ‘stained glass’), film with XO XO on it, or in new monochrome black and white, among just a few. While I thought these were a bit gimmicky initially, once the photos were printed out, they had a really nice unique quality to them. I kind of got attached to the stained glass frame.
The films come in plastic boxes that clip into the printer by opening a wide door in the printer’s body. You would think that makes it easy to swap cartridges back and forth, and that there’d be no worry about exposing the film too early. Turns out that’s not the case.
I swapped a few cartridges back and forth in the printer. Each time I’d make a swap, the printer would spit out a new blank photo, essentially wasting one of your precious photos. The ensuing print jobs came out with white streaks across the film, or otherwise appeared overexposed.
I checked with Fujifilm directly and they confirmed my findings; film cannot be switched back and forth. You must use an entire cartridge until it’s empty or risk ruined film and wasted money.
So the bottom line is, while you might think it’s possible to switch films and cartridges, you really can’t.
Film packs come with 10 prints per pack and cost anywhere from $13 to $24, so it pays to shop around. The prints use high resolution ( 800×600 dots at 320dpi ) files to print crisp, clear photos, even if they are quite small.
Mercifully, there are no ink cartridges to worry about in this printer, and that’s because the photos develop on the paper itself. If you’re of a certain age, you’ll remember original Polaroid instant prints that popped from the camera blank, then developed over a few minutes. These work exactly the same way.
Other options for photo printing
There are plenty of options in the Fuji Instax Share app for improving, changing or playing around with your printed photos.
There are filters you can add to the photo (black and white, sepia), or seasonal frames. You can also add text boxes over part of the photo or crop it square, or print two photos on one print. I found that kind of useless, as the images are so tiny, most detail is lost. There are also enhancements you can make to less than stellar snaps to improve their quality.
Check marks on the photo grid in the app helpfully lets you know which ones you’ve printed so there won’t be any accidental duplicates.
The Instax Share SP2 prints pretty quickly, once you’re connected. Fuji says, “when users send an image to the “Instax SHARE Smartphone Printer SP-2” via wireless LAN, they can get photos in just 10 seconds,” and that was about my experience with it too. Plenty fast enough for me.
The Instax Share SP2 has a rechargeable battery which uses a micro USB cable. Fuji says the battery life on the printer will last about 100 prints, which could be weeks depending on how often you’re using the device. During my two-plus weeks of testing, and printing about 30 photos, I certainly never needed to recharge it. A battery indicator also gives you a heads up on power status.
Overall review of Fujifilm Instax Share SP2 photo printer
Of all the mini photo printers I’ve tried, I like the prints from this device the most. I like the Polaroid style border, I think the new artsy borders are fun and I like that there are many print options, though I didn’t find I used them very much.
I think the setup interface could function better, as I believe this will be very frustrating for people with less tech savvy. I also found it quite annoying that the printer goes to sleep so quickly and then requires constant reconnection. That aside, the user interface is simple to navigate and easy to use. The various filters and add-ons are also easy enough to manipulate.
The printer operates absolutely silently, which is nice, and the battery lasts a long time.
The Fujifilm Instax Share SP2 is available in gold or silver, and sells for about $199 at the Source, Best Buy, and London Drugs.
It doesn’t take much to kick your home’s connectivity into high gear. You probably already have WiFi, so what about taking things to the next level? A high-powered router, or a camera to keep watch on the kids, the dog; security can be great additions. But even small add-ons like a set of wireless speakers can save you trouble, hook ups and clutter when it comes to entertaining or relaxing. And Wireless TV from Google on a thumb-drive? … don’t even get me started. Click here to read the FULL article: 4 Ways to Connect Your Home & Make Life Better