When was the last time you printed a photo? If you’re like most people, it’s been quite a while. Many of us take hundreds of photos every year, but very few of them get to escape the digital prison that is our smart phones.
There are now mini photo printers on the market. These pocket-sized photo printers are very portable and easy to use meaning it’s now very convenient to print photos.
Since the world has become a fully digital place, no one prints photos any more. An array of small photo-specific printers on the market aims to change that habit by making printing easy and adding some fun elements to the experience.
The Polaroid SnapTouch camera and photo printer is one of those gadgets. (I’ve also reviewed the older generation Polaroid SocialMatic camera. Read that review here)
Small and compact, the SnapTouch looks cool and sleek right out of the box. It uses Polaroid’s Zink paper to spit out small 3”x2” prints. The backings are adhesive, so these tiny prints can also double as stickers.
Polaroid SnapTouch Camera + Video Specs
The camera is a 13 megapixel camera. By comparison, the iPhone 6 has just 8 megapixels, so the photos should be pretty good. The SnapTouch also takes 1080p video and can store images and videos on a 128 GB Micro SD card (not included).
Unfortunately, neither the package, nor the Polaroid website tell you how much storage is on the camera without a micro SD card, so I snapped photos until it told me the internal hard drive was full – that’s a grand total of 15 photos. (And by the way, there’s no bulk delete feature I could find; each photo must be manually deleted, which was tedious)
Without that micro SD card you can record less that 30 seconds of video. The lens will also constantly refocus the image so it looks like it’s wavering as the autofocus constantly adjusts. I think it’s a terrible idea to have so little internal storage, but I guess that’s common with cameras, that you need to purchase additional memory. It would be nice if that’s spelled out on the package.
Set Up – Polaroid SnapTouch
Setting up the camera is reasonably simple. You’ll need Polaroid’s SnapTouch app to access some features but for the most part you can take photos and print them instantly right from the camera. You snap the picture, then hit the print button right on the back of the screen.
Things get a bit more complicated when you want to use the camera as a printer and send photos from your smartphone, but we’ll get to that…
Delayed image capture
It’s worth noting the photography is not fast here. There is a delay of about a second or two from the time you press the shutter button until the image is captured. While this will be frustrating but adaptable for adults, kids are bound to keep hitting the shutter button or moving the camera, not realizing image capture is already in progress.
The camera was going to sleep relatively quickly during my testing, but it can be woken up almost immediately by touching the shutter button lightly. I discovered soon after there is a setting in the menu that allows you to extend that screen timeout option up to 2 minutes.
Printing Options, Effects and Filters
You can choose a variety of different colour borders that look like a vintage Polaroid camera frame when you want to print. While that original ‘Polaroid’ style photo paper no longer belongs to Polaroid (read why here) you can still print a faux Polaroid border with special effects.
If you don’t opt for that, these prints come out edge-to-edge.
There are also a variety of different effects and filters like Instagram, though they’re quite limited as far as choice goes, and honestly, they’re quite garish and extreme.
A touch screen on the back of the camera let you access photos, delete, edit them, share them, or print. There are also digital ‘stickers’ or emojis you can add to the photos. By touching the emoji or icon, you can drag it around the screen and place it on the photo wherever you want. That function worked easily enough, though the emojis are limited to a flower, a heart, lips, sunglasses and a smiley face, as you can see at right. You’re not exactly going to become Rembrandt here.
Print speed of the Polaroid SnapTouch camera
While it takes a second or two from the time you hit the print button for the process to begin, the printing of the image takes an awfully long time; almost 30 seconds. With that said, if you compare this Polaroid printer to a device like the Fujifilm Instax Share printer, the overall wait times might be quite similar.
The Polaroid printer takes about 30 seconds to spit out the print, but when it’s done, the print is fully ready and rendered in color. With the Instax Share, it may print the photo much faster, but you’ll still need to wait a minute or so for the image to develop on the paper.
Printing from your smartphone to the camera
The SnapTouch camera gives you the option of sending photos from your smartphone or other device to the camera for instant printing.
Set up for this option is slightly different. You’ll need to connect the phone and the camera, and doing this is not intuitive, nor does the camera or app walk you through it.
There is nothing within the app which will tell you why your printer is not talking to your phone. Fortunately for me, I’ve dealt with enough of these devices that I know you need to go to your phone’s Settings menu, find the Bluetooth settings screen, then look for the Polaroid SnapTouch to appear in the Bluetooth list.
Click to connect it, and you should hear the device emit a tone that lets you know it is finally connected. Return to the app and you should see confirmation of that fact. From there you can select the photo you’d like to print.
Constant reconnection to Bluetooth
It’s worth taking note that each time the camera powers off, it loses the connection to Bluetooth, and each time you need to reconnect via your smartphone’s settings menu. That was annoying, but not an uncommon problem in other similar printers I’ve been testing, like the Fujifilm Instax Share SP2 printer. (Read that review to see which of these photo printers comes out on top.)
When picking a photo from the camera roll, I noticed the Polaroid app frequently zooms in the photos by quite a bit. The app asks you to pinch to adjust the zoom, but it won’t actually let you do it. Weird.
Every time I tried to print from my phone, the SnapTouch did that weird zoom thing. Finally, I found that by adjusting the orientation of the film on the camera screen I could disable the zoom effect. By the time I’d reverted the photo from upside down back to right side up, it had snapped back to normal size without the zoom. Also weird.
Sometimes I would connect to the SnapTouch in order to print, select the photo I wanted, and then click print, but nothing would happen. I would get an error message in the app telling me the printer was busy, but nothing would print out, and nothing else would happen. No error messages, no warnings, no indication if the SnapTouch was out of paper… nothing.
Turning the camera off and then turning it back on again seemed to deal with the worst of this trouble, but of course then you need to re-connect to Bluetooth.
SnapTouch Print Speed from smartphone
It takes the Polaroid SnapTouch about 6 seconds, and even up to 10 seconds on some attempts from the time you hit the print button in the app, until your photo begins printing from a smartphone (in my tests and iPhone 6 plus). Once you get used to this it’s OK I guess, but the first few times, you’ll have no idea the photo was actually about to print so you think you should start over, or keep hitting print. Sometimes it omes out eventually, other times, nothing happened, and maybe I confused its little circuits.
I found many things on this camera were slow; from the image capture, to printing being initiated. It made the camera feel quite old, clunky, and outdated.
No fun effects when connected to your smartphone
One final note on printing from your smartphone; filters and borders will not work on photos that are printed from your smart phone. (If they do, I couldn’t figure it out, and there seemed to be no easy explanation found on the Polaroid website.) In order for this effect to work, you must snap the photo using the camera.
Polaroid SnapTouch photo quality
I was really, really unhappy with the photo quality of the Polaroid prints. The colours were not accurate, the prints more often than not looked washed out, and on many of the photos I printed, I was left with odd lines across the print. For a 13 mp camera, what was coming out the back didn’t seem right. Comparing it to my 8mp iPhone camera and viewing those on my iPhone screen, the Polaroid SnapTouch looks and feels like a toy by comparison.
Overall impressions of the SnapTouch camera
I would absolutely not buy this camera for myself. I didn’t like the photo quality because the Zink paper seemed washed out and it didn’t provide true colour in my opinion. For the price (+$200) I think you could do much better.
Set up and operation is not intuitive on this device when pairing it with a smartphone. Yes, you can figure it out but it wasn’t easy. Plus the fact that none of the much touted special effects or filters can be added to the photos when printed from a smart phone is a big oversight. Those are only available on photos taken using this SnapTouch camera.
The camera overall feels like a toy, and maybe that’s all it needs to be, but I think this device would be frustrating for kids and tweens too because of the slowness of its operations. Plus, I think it should be spelled out on the package that you need a Micro SD card, and that one is not included.
While I loved the idea of this gadget, it just doesn’t have the quality and versatility I look for in a device. I don’t feel it performed well as either a camera or a photo printer. And the bottom line for me is that many of the photos I printed, from both the iPhone and the camera are such low quality, in some cases, they’re not worth having. You can also get
While most of the photos we take stay locked forever on our smartphones, it’s now getting easier to print them at home. In part one of a three part series here on the blog, we’ll take a look at some of the gadgets out there that will print photos for you. First up, the Fujifilm Instax Share printer.
Testing the Fujifilm Instax Share SP2 photo printer
Fujifilm has recently upgraded its pocket photo printer, the Instax Share, to make numerous improvements; the new model is known as the SP-2. It prints mini size photos only, that measure 62mm x 46mm. I had a chance to test this device for several weeks, and here’s what I found. I previously reviewed the Instax Share SP-1, and you can read that review too.
Set up wasn’t intuitive
Setting up the Instax Share printer wasn’t very intuitive. With the printer charged, and the app downloaded, you might think you can just open the app and print. Not so. In the initial set up, you select which type of printer (sp-1 OR sp-2) you’d like to use. But after that it doesn’t tell you where to go or how to move forward with setup.
How to set up and connect Fujifilm Instax Share
Fortunately for me, I’ve set up enough Bluetooth and Wi-Fi devices to know that at this point, I needed to exit out of the Fujifilm app, and go to the phone’s ‘settings’ menu. Select ‘Wi-Fi’, then switch the printer on.
At this point you should see Fujifilm/Instax/Share or some combination of those words pop up as a Wi-Fi choice. Select it, then once it’s connected, you can close settings and return to the app. By now you should see the new printer in the app, if you don’t click ‘Connect and print’ and the app should connect.
Once the set up process is complete, printing is ultra easy. Simply select the photos icon in the app or take a new photo. Once you’ve chosen what you want, select “connect and print”. There are several other printing options, but we’ll get to those in a bit.
Annoyingly, the printer will go to sleep after a few minutes, so it’s important to note if you left it unattended for a period of time, you may need to turn it back on and reestablish the Wi-Fi connection before you can connect again. This involves basically repeating part of the set up process each time you want to print. I find this a huge pain. You can’t just turn the printer on an pop out a few prints, and because the printer automatically goes to sleep after about 5 minutes it’s a constant on/off/reconnect process.
Fun new films – but who owns Polaroid film technology?
The photos printed on the Fujifil Instax Share SP-2 are on a retro-style ‘Polaroid’ frame. Fujifilm now has this technology, though Fujifilm rep Florence Pau tells me, “Fujifilm has a long history with instant film and Instax has no affiliation with Polaroid brand or technology. Essentially, the borders are there to seal the film.”
Polaroid was more blunt when I asked them why Polaroid cameras don’t use their original iconic film. Stephanie Agresti told me in an email, “Polaroid does not presently own the previous film technology. Polaroid products now integrate Zink Zero Ink technology to produce images instantly.”
Since my last test run with an Fujifilm Instax Share printer there are a variety of new instant films that have been released; all of them are mini sized, similar to what you might get from a photo booth. Available in 10 packs, you can now get printed borders on the film, including stripes, a colourful checkerboard (called ‘stained glass’), film with XO XO on it, or in new monochrome black and white, among just a few. While I thought these were a bit gimmicky initially, once the photos were printed out, they had a really nice unique quality to them. I kind of got attached to the stained glass frame.
Can you swap film or cartridges on the Instax Share?
The films come in plastic boxes that clip into the printer by opening a wide door in the printer’s body. You would think that makes it easy to swap cartridges back and forth, and that there’d be no worry about exposing the film too early. Turns out that’s not the case.
I swapped a few cartridges back and forth in the printer. Each time I’d make a swap, the printer would spit out a new blank photo, essentially wasting one of your precious photos. The ensuing print jobs came out with white streaks across the film, or otherwise appeared overexposed.
I checked with Fujifilm directly and they confirmed my findings; film cannot be switched back and forth. You must use an entire cartridge until it’s empty or risk ruined film and wasted money.
So the bottom line is, while you might think it’s possible to switch films and cartridges, you really can’t.
Fujifilm Film cost and print quality
Film packs come with 10 prints per pack and cost anywhere from $13 to $24, so it pays to shop around. The prints use high resolution ( 800×600 dots at 320dpi ) files to print crisp, clear photos, even if they are quite small.
Mercifully, there are no ink cartridges to worry about in this printer, and that’s because the photos develop on the paper itself. If you’re of a certain age, you’ll remember original Polaroid instant prints that popped from the camera blank, then developed over a few minutes. These work exactly the same way.
Other options for photo printing
There are plenty of options in the Fuji Instax Share app for improving, changing or playing around with your printed photos.
There are filters you can add to the photo (black and white, sepia), or seasonal frames. You can also add text boxes over part of the photo or crop it square, or print two photos on one print. I found that kind of useless, as the images are so tiny, most detail is lost. There are also enhancements you can make to less than stellar snaps to improve their quality.
Check marks on the photo grid in the app helpfully lets you know which ones you’ve printed so there won’t be any accidental duplicates.
Print speed -Fujifilm Instax Share SP2
The Instax Share SP2 prints pretty quickly, once you’re connected. Fuji says, “when users send an image to the “Instax SHARE Smartphone Printer SP-2” via wireless LAN, they can get photos in just 10 seconds,” and that was about my experience with it too. Plenty fast enough for me.
The Instax Share SP2 has a rechargeable battery which uses a micro USB cable. Fuji says the battery life on the printer will last about 100 prints, which could be weeks depending on how often you’re using the device. During my two-plus weeks of testing, and printing about 30 photos, I certainly never needed to recharge it. A battery indicator also gives you a heads up on power status.
Overall review of Fujifilm Instax Share SP2 photo printer
Of all the mini photo printers I’ve tried, I like the prints from this device the most. I like the Polaroid style border, I think the new artsy borders are fun and I like that there are many print options, though I didn’t find I used them very much.
I think the setup interface could function better, as I believe this will be very frustrating for people with less tech savvy. I also found it quite annoying that the printer goes to sleep so quickly and then requires constant reconnection. That aside, the user interface is simple to navigate and easy to use. The various filters and add-ons are also easy enough to manipulate.
The printer operates absolutely silently, which is nice, and the battery lasts a long time.
The Fujifilm Instax Share SP2 is available in gold or silver, and sells for about $199 at the Source, Best Buy, and London Drugs.
If there’s one review I’ve been looking forward to the spring, it’s this one.
Recently both a Polaroid Socialmatic and a Zip printer arrived for testing, and I couldn’t have been more excited.
I was a bit shocked when I opened the box for the Socialmatic. The camera itself is quite large, much larger than I was expecting. It’s very flat, very square and was difficult to grip. While many digital cameras fit neatly in your hand, this camera is quite the opposite. That’s probably because it does more than just take pictures. It’s a video camera and printer too, all in one package.
From full off to on and ready to go, the Socialmatic takes a frustrating 30 to 40 seconds to start up. Then if you don’t touch the screen immediately it goes dark with no obvious way to get it back on. Eventually I figured out a quick touch of the power button does it, but it was bothersome.
I started taking photos almost immediately and noticed a few things right off the bat. First of all, it takes about three seconds from the time you press the shutter button until it actually registers the photograph, which resulted in plenty of closed eyes and movement in my test pictures. The other thing I did not like was the quality of the screen was not good. The resolution was surprisingly low.
Photos & Quality
Initially I was expecting Polaroid style photos with the papery white border, however Polaroid no longer owns this technology. So my test pics printed edge to edge on the photo paper. The photo quality was not great. For the most part the photos were grainy and dark. Even photos I tried to take in good strong light didn’t come out looking as high quality as I was hoping for. I tried to take some photos in a pub that was not super dark, but all the photos came out very very dark and grainy. We turned on the flash to compensate but using it made us all look like deer in headlights. There was no happy medium.
One thing I did enjoy about the photos was the sticky backing on the Zink photo paper so you could use the photos as stickers. That’s a nice touch.
After testing for a couple hours that first day, I put the camera away until three days later. When I went to turn it back on, the batteries were already dead. I’m wondering if perhaps this was because I didn’t turn it fully off, only put it to sleep. That’s something to be aware of. I would charge it up for several hours to full battery, turn it off and use it once or twice for just a few minutes, then power it down again, a few days later if I went back to it the battery was dead and required a full recharge.
Video Review of the Polaroid Socialmatic Camera & Printer
Polaroid Zip printer
The Polaroid Zip printer is much smaller than the Socialmatic, but is it it is a printer only. I found this device very easy to set up and use, in fact, within seconds of plugging it in and selecting a photo you’re printing. The quality of the photos is not quite what you’d expect from a high resolution fancy camera shop, but for the size and availability, it’s very handy and easy to share with family and friends where you are, and for me, the fun and convenience factor here is more valuable than crisp HD copies.
There are some things about the Zip app I don’t like. For example it does not have a ‘reprint’ feature like others do. This means you cannot easily select photos for reprint without starting the printing process over from scratch. However the app’s layout and user interface are straightforward and simple, and very easy to read, navigate and understand.
The Zip also used Polaroid’s Zink paper, and as I said, the quality of the photos is not good. Worth noting, it does not appear that the photo paper is light-sensitive, like film is, or like some other photo papers can be. I dropped the printer and the back popped open and scattered the remaining photo paper pieces all over the place. I reloaded it and put it back together, and in subsequent print jobs, everything printed just fine. So it’s nice to know the paper is not light sensitive, and losing the back off the printer will not destroy a whole stack of expensive photo paper.
The Verdict Overall
While I’d definitely like to buy a Zip printer, I’ll take a pass on the Socialmatic. The Zip is easy to use, infinitely portable, and makes printing fun sized photos easy. I also like the sticker option for the photos.
The Socialmatic is just too large and unwieldy to be a fun take-along. Basically it was just a bulky exercise in frustration, and not a fun and enjoyable and social tool. I’d much rather use my smartphone for great quality photos and a high-res display, then print them on the spot with the Zip. I’m interested to see if there’s a future incarnation of the Socialmatic, and if there is, I’d love to give it another chance.
The Socialmatic and the Zip are available at Bestbuy.caas well as from Polaroid.com
We’ve all got hundreds, and possibly tens of thousands of digital photos on our devices. For the most part, they sit on those devices and collect digital dust. So this week on Tech Talk on CTV, we’ve got a few ways you can bring them to life.
1. Print Them!
Pocket-sized photo printers are available and allow convenient at-home or on-the-go printing of your photos instantly. I love how easy it is to operate this printer, and that it’s so small you can take it to parties, or nights out, so you’ve got a virtual photo0 booth at the ready!
The Zip is a small palm-sized printer that used photo paper sheets to print pics instantly.
The Socialmatic is a hybrid when it comes to photo printing. This device is actually a camera and printer combo. You can take pictures and print them on the spot; it takes about 20 seconds to spit out a small 2×3″ photo with a stick-back option. These photos are printed on a paper-like edge-to-edge film. While the camera is much smaller and slimmer than the old fashioned Polaroid Instant camera you may remember, it is large and rather unwieldy. There is convienience in having an all in one camera and printer, however.
Fujifilm Instax Share
Another pocket or palm sized printer, I found this one to be the easiest to use. I also preferred the film paper used by Fujifilm; it looks much more like the traditional Polaroid film with its white papery edge frame that you can doodle or write on.
2. Bring them into your home!
From wall hangings to toss cushions, you can turn your photos into beautiful decor art.
This is a great idea I bet more folks would grab on to if they knew about it. I made some cushion covers featuring 2 major Calgary city landmarks. If you have a favourite place, a flower you love or just a photo you took that you’re majorly proud of, putting it on a cushion is a great way to show it off and celebrate what you love. Toss cushions also lend themselves nicely to using squared off Instagram photos.
Take your favourite landmark, person or event and put it on fabric. Printing your own fabric gives you a lot of flexibility with how you use the image. You can make an apron, table linens, napkins, even clothing if that’s your bag. The possibilities are endless, particularly because if you can’t find just the right fabric for a project, you can make you own.
A great way to present custom gifts, and particularly corporate gifts, wrapping paper will make your gift stand out. Again, if you have a favourite place, scene or photo, you can also look at putting it on wallpaper, for a permanent and prominent reminder.
Getting photos printed on canvas is easier and more common now, but it still looks slick. Getting a wrapped canvas print of a favourite photo is a great way to create art for your home and keep memories close.
Printing durable photo cases with a photo of your choice has never been easier. Photobox has cases for a variety of cell phones including Samsung Galaxy, iPhones and iPads. Put your baby or child on your phone case, or use a favourite location or vacation snap.
4. Eat Them!
Many bakeries can print your digital photos on edible paper with edible inks, meaning they can change cakes and cookies from boring, to personalized. Check for bakeries in your area, but we got ours from Cakeworksin Calgary.
What have you done with your photos that’s unique and memorable? Let me know in comments below!
Just when you thought digital cameras were dead thanks to the proliferation of cell phone cameras, the Polaroid Socialmatic arrived on my desk. This camera is different from other cameras, mainly because it has a built in printer.
One of the first things I noticed about the Socialmatic is that it’s nowhere near pocket-sized. This camera is large, square, bulky and not easy to hold. To do some initial tests, I brought it to meet some friends at the pub and took some shots. Sadly the photos were rather dark on their own. Adding the flash helped, but gave the photos a bleached out overly-bright look.
That said, the convienience of being able to print photos on the spot is appealing. I’ll post a full review after further testing.
Wondering what to do with all the digital photos that sit on your device for years and years? Start printing the best ones!
The new Fujifilm Instax Share printer arrived on my desk this week, and from the word ‘go’ it was a treat to try out. The Instax is truly pocket sized; it’s small and compact, but if you open it up and look at its guts, it looks just like a real full size printer.
The printer operates basically as you might remember a Polaroid camera operating; it spits out a small photo instantly that takes a couple minutes to fully develop.
So far the printer has been easy to use (after a bit of initial connection confusion, which I’ll detail in a full review later), and it’s getting well and truly addictive. I love being able to print favourite snaps on the spot, and it’s nice to be able to finally do something with all those pics cluttering up my smartphone.
The film paper sheets are sold in 20-sheet packs for about $20, so the cost of printing individual photos is about a buck apiece. Not cheap when you think about it, but that’s the price you pay for convenience and retro photo fun.