I’ve been toying with making a switch from Apple to Android for a while now. I’ve long been curious if the grass really is greener on the other side.
With a new Samsung Galaxy S8+ in hand I finally made the leap about five weeks ago. I wanted to spend an extended period of time living in this new world before writing my review. So after much use, some travel with the new phone and plenty of new apps, photo-taking and more, here it is. Continue reading “Review – Living with my new Samsung Galaxy S8+”→
While most of the photos we take stay locked forever on our smartphones, it’s now getting easier to print them at home. In part one of a three part series here on the blog, we’ll take a look at some of the gadgets out there that will print photos for you. First up, the Fujifilm Instax Share printer.
Testing the Fujifilm Instax Share SP2 photo printer
Fujifilm has recently upgraded its pocket photo printer, the Instax Share, to make numerous improvements; the new model is known as the SP-2. It prints mini size photos only, that measure 62mm x 46mm. I had a chance to test this device for several weeks, and here’s what I found. I previously reviewed the Instax Share SP-1, and you can read that review too.
Set up wasn’t intuitive
Setting up the Instax Share printer wasn’t very intuitive. With the printer charged, and the app downloaded, you might think you can just open the app and print. Not so. In the initial set up, you select which type of printer (sp-1 OR sp-2) you’d like to use. But after that it doesn’t tell you where to go or how to move forward with setup.
How to set up and connect Fujifilm Instax Share
Fortunately for me, I’ve set up enough Bluetooth and Wi-Fi devices to know that at this point, I needed to exit out of the Fujifilm app, and go to the phone’s ‘settings’ menu. Select ‘Wi-Fi’, then switch the printer on.
At this point you should see Fujifilm/Instax/Share or some combination of those words pop up as a Wi-Fi choice. Select it, then once it’s connected, you can close settings and return to the app. By now you should see the new printer in the app, if you don’t click ‘Connect and print’ and the app should connect.
Once the set up process is complete, printing is ultra easy. Simply select the photos icon in the app or take a new photo. Once you’ve chosen what you want, select “connect and print”. There are several other printing options, but we’ll get to those in a bit.
Annoyingly, the printer will go to sleep after a few minutes, so it’s important to note if you left it unattended for a period of time, you may need to turn it back on and reestablish the Wi-Fi connection before you can connect again. This involves basically repeating part of the set up process each time you want to print. I find this a huge pain. You can’t just turn the printer on an pop out a few prints, and because the printer automatically goes to sleep after about 5 minutes it’s a constant on/off/reconnect process.
Fun new films – but who owns Polaroid film technology?
The photos printed on the Fujifil Instax Share SP-2 are on a retro-style ‘Polaroid’ frame. Fujifilm now has this technology, though Fujifilm rep Florence Pau tells me, “Fujifilm has a long history with instant film and Instax has no affiliation with Polaroid brand or technology. Essentially, the borders are there to seal the film.”
Polaroid was more blunt when I asked them why Polaroid cameras don’t use their original iconic film. Stephanie Agresti told me in an email, “Polaroid does not presently own the previous film technology. Polaroid products now integrate Zink Zero Ink technology to produce images instantly.”
Since my last test run with an Fujifilm Instax Share printer there are a variety of new instant films that have been released; all of them are mini sized, similar to what you might get from a photo booth. Available in 10 packs, you can now get printed borders on the film, including stripes, a colourful checkerboard (called ‘stained glass’), film with XO XO on it, or in new monochrome black and white, among just a few. While I thought these were a bit gimmicky initially, once the photos were printed out, they had a really nice unique quality to them. I kind of got attached to the stained glass frame.
Can you swap film or cartridges on the Instax Share?
The films come in plastic boxes that clip into the printer by opening a wide door in the printer’s body. You would think that makes it easy to swap cartridges back and forth, and that there’d be no worry about exposing the film too early. Turns out that’s not the case.
I swapped a few cartridges back and forth in the printer. Each time I’d make a swap, the printer would spit out a new blank photo, essentially wasting one of your precious photos. The ensuing print jobs came out with white streaks across the film, or otherwise appeared overexposed.
I checked with Fujifilm directly and they confirmed my findings; film cannot be switched back and forth. You must use an entire cartridge until it’s empty or risk ruined film and wasted money.
So the bottom line is, while you might think it’s possible to switch films and cartridges, you really can’t.
Fujifilm Film cost and print quality
Film packs come with 10 prints per pack and cost anywhere from $13 to $24, so it pays to shop around. The prints use high resolution ( 800×600 dots at 320dpi ) files to print crisp, clear photos, even if they are quite small.
Mercifully, there are no ink cartridges to worry about in this printer, and that’s because the photos develop on the paper itself. If you’re of a certain age, you’ll remember original Polaroid instant prints that popped from the camera blank, then developed over a few minutes. These work exactly the same way.
Other options for photo printing
There are plenty of options in the Fuji Instax Share app for improving, changing or playing around with your printed photos.
There are filters you can add to the photo (black and white, sepia), or seasonal frames. You can also add text boxes over part of the photo or crop it square, or print two photos on one print. I found that kind of useless, as the images are so tiny, most detail is lost. There are also enhancements you can make to less than stellar snaps to improve their quality.
Check marks on the photo grid in the app helpfully lets you know which ones you’ve printed so there won’t be any accidental duplicates.
Print speed -Fujifilm Instax Share SP2
The Instax Share SP2 prints pretty quickly, once you’re connected. Fuji says, “when users send an image to the “Instax SHARE Smartphone Printer SP-2” via wireless LAN, they can get photos in just 10 seconds,” and that was about my experience with it too. Plenty fast enough for me.
The Instax Share SP2 has a rechargeable battery which uses a micro USB cable. Fuji says the battery life on the printer will last about 100 prints, which could be weeks depending on how often you’re using the device. During my two-plus weeks of testing, and printing about 30 photos, I certainly never needed to recharge it. A battery indicator also gives you a heads up on power status.
Overall review of Fujifilm Instax Share SP2 photo printer
Of all the mini photo printers I’ve tried, I like the prints from this device the most. I like the Polaroid style border, I think the new artsy borders are fun and I like that there are many print options, though I didn’t find I used them very much.
I think the setup interface could function better, as I believe this will be very frustrating for people with less tech savvy. I also found it quite annoying that the printer goes to sleep so quickly and then requires constant reconnection. That aside, the user interface is simple to navigate and easy to use. The various filters and add-ons are also easy enough to manipulate.
The printer operates absolutely silently, which is nice, and the battery lasts a long time.
The Fujifilm Instax Share SP2 is available in gold or silver, and sells for about $199 at the Source, Best Buy, and London Drugs.
Home automation used to be the stuff of mansions, tycoons and futuristic films and cartoons. No more. Now it’s easy and relatively inexpensive to adopt easy home automation features into your house.
What can you do with home automation ?
From controlling your thermostat, door locks, light bulbs, light switches, sockets or plugs and even a power bar, manipulating the devices in your home for security, convenience or money savings has never been more possible.
Testing out Belkin WeMo
Enter the WeMo system by Belkin, just one of several home automation hubs. I recently had a chance to review and test several products in the WeMo line, from lights to plugs.
WeMo was easy to use right out of the box. I started my testing with the Lighting Starter Kit ($99), which comes with two LED light bulbs and a hub or the “Link”. Getting things going was as simple as downloading the WeMo app (for smartphones or tablets), plugging the Link into a wall outlet, and screwing in the bulbs. The Link connects to your homes existing wifi, and uses that signal to control your bulbs. Once the bulbs were installed and turned on, the app found them immediately by doing a scan. Once they’re set up, they’re set up for good, even if you remove them for a time.
The app walks you through the set up, making it foolproof.
One plus of this system for me is the Link hub is tiny compared to other hubs I’ve tested; it fits in the palm of your hand, and easily blends into the wall so you don’t notice it. It’s important to note that while you need the Link hub for the bulbs, other WeMo devices connect on their own, and need no external hub or Link. In fact a WeMo staffer pointed out to me, “most of the existing WeMo product line doesn’t need a hub at all: the WeMo Switch, Insight Switch, Light Switch, Netcam, and Crock Pot connect directly to Wi-Fi.” So why do the bulbs need one? Simply put, the technology to connect to the wifi takes up space. Some bulbs I’ve tested, like the LIFX system, are much larger and heavier than the average bulb. So while those bulbs do not need an external wifi link, they do not fit in every fixture. The WeMo bulbs do, but the tradeoff is the small Link.
The WeMo bulbs are white light bulbs only. I’ve written before about the fun of colored LED bulbs that you can change, but for now, the WeMo bulbs are traditional. Maybe that will change soon; having a colour option is really fun and allows you to really customize your home.
Setting up the WeMo plugs or outlets was a bit harder. There are essentially two set up screens within the app, and for the first few attempts I was apparently using the wrong one. I kept connecting to “WeMo Set Up Instructions”, but I needed to be using “Add WeMo Link Device”, as seen in the screen grab. It seems like an easy mistake to make, and I figured out the error quickly enough, but I could see this being confusing and frustrating for others too.
Additionally, I found the set up screen getting locked, and having to force-quit the app in order to try again. Then, somehow, mysteriously, the device would be connected and working.
Now, while this was frustrating for me, a person who likes to understand what’s happening each step of the way, it wasn’t a deal-breaker for me. After a few tries, the WeMo system took care of itself and from then on worked just fine. Since then, I’ve had absolutely no trouble to glitches with the system; it works reliably and flawlessly.
There have been rather frequent firmware updates required; not that it’s a problem. In fact, I like companies who are constantly trying to keep software up to date. But it’s good to be aware you may actually need to do the firmware upgrades before the app and devices will work properly.
Easy to Use Timers, Away Function, Auto-On
One of the easiest aspects of the WeMo system is how easy it is to set up what WeMo calls Rules. It allows you to turn your bulbs, plugs or switches on or off at appointed times, which is great if you’re going away, or frequently get up before sunrise or get home before dark.
I’ve made some rules which turn on a light in my living room, softly at 50% brightness at 3am when I get up to go to work. I also have the same lap set to come on at sundown, and turn off later at night. Similar rule and timer functionality is also available on the plugs/outlets. More on that below.
Testing the WeMo Switch
One of the things I like about the WeMo Switch ($49) I tested is that it’s powerful enough for me to plug in a fan or heater. Some wifi-enabled plugs only have enough juice for a lamp, so it’s good to check the packaging or details before you buy and make sure the appliance you want to plug in to the switch (from any company you buy from) is safe to use. During my testing, I plugged a small space heater in, and set a timer rule to turn on about 30 minutes before bed so the room was warm. I also set it to shut off automatically after an hour. Another rule setting turns it on about 15 minutes before I wake up, and off again 30 minutes after that. That’s it; it’s ‘set it and forget it’! I have all these items functioning for me, on the schedule I decide, and the best part is that it’s easy, so very easy to program with the free WeMo app.
The WeMo Insight – It gives you data
I tested another WeMo plug; the Insight ($59). The WeMo Insight Switch will send notifications to your smartphone or tablet showing how much energy your electronics are using. Of course, you also have the ability to turn your electronics on and off and monitor their behaviour via the app.
One of the limits of home automation systems has been that you need to be at home, on your wifi network to control your devices. But now many companies, WeMo included, are adding internet connectivity or Remote Access to the mix, allowing you to access your bulbs and switches online, meaning if you forget to turn off a light, or the heater, you can do it from the office, or from the resort in Mexico.
Other WeMo Products
While I didn’t test these below, it’s worth mentioning some other neat peripherals in the WeMo lineup. The Crock-Pot® Smart Slow Cooker with WeMo™ works with the app to adjust cook settings. WeMo says, “if you’re stuck at work or running late, you don’t have to worry. You can turn it on and off, change the cooking temperature, set timers and watch its status all with the simple, intuitive and free WeMo App for your smartphone or tablet. WeMo works over Wi-Fi and 3G/4G, so you can easily adjust your dinner schedule whenever you like, from wherever you are.”
The Belkin NetCam works with the WeMo collection of products so you can program home automation triggers like turning on your lights when you walk through the door. WeMo is also adding to its home automation arsenal, announcing partnerships with OSRAM, the parent company of OSRAM SYLVANIA, and Jarden Corporation, maker of
Crock-Pot®, Mr. Coffee® and more, to bring home automation to more products.
WeMo also makes a wifi-enabled Light Switch. The company says it ‘allows you to turn lights on and off from anywhere–from across the house, from the backyard, or from the other side of the world. WeMo Light Switch replaces a standard light switch in your home and can be controlled remotely with an Android smartphone or tablet, iPhone, iPad, or iPod touch. It works with your existing Wi-Fi® network and anywhere your smartphone or tablet has an Internet connection (3G or 4G LTE). Easy for most Do It Yourselfers.”
The Bottom Line
I thoroughly enjoyed the Belkin WeMo experience and I recommend it to others who may be looking to get started on home automation. The system is easy to use and trouble free once it’s up and running. Make sure to set up via the “Add WeMo Link Device” screen, and not the “WeMo Set Up Instructions”. I’ll be watching to see when WeMo adds coloured light bulbs to its arsenal, as I’ve gotten addicted to those of late. And I’m interested to try the other products in the lineup too to see just how useful they are.
It’s worth noting that the prices I posted for these products above are recommended retail, but at the time of posting this (mid-February), there was a good deal on the devices on theBelkin websitethat may give you extra incentive to pick some up. In Canada, WeMo is also available from Future Shop.